Guttering and Fascias

Guttering and Fascias

Fielders® steel guttering and Fascias conforms to AS 1397, AS 2179 and AS 2728, unless noted otherwise.

Available Materials

Material / FinishConforming toBMT (mm)
ZINCALUME® SteelAS 1397 G300 - AM125
(Steel Fascia G550)
0.50
COLORBOND® SteelAS 1397 G300 - AM100 and AS 27280.55*
COLORBOND® Ultra SteelAS 1397 G300 - AM150 and AS 27280.55
COLORBOND® Stainless SteelGrade 430 base 3000.45
GalvanisedZ2750.55
Heritage GalvanisedAS 1397:2001 G300 - Z6000.50
Table RGA GF AM 001
Notes:
1. * OG115 and 115 Quad is available in 0.42mm BMT.

Guttering and Fascia Availability

Gutter TypeSAWANSWVIC
115 Hi Ten O.G.Y-YY
115 QuadY--Y
115 Quad (WA)-Y--
125 D GutterY-YY
125 Quarter Round-Y--
150 Half RoundY-YY
150 Halfline®Y-YY
150 Hi Front QuadY-YY
Ainsworth OGY--Y
Fascia CoverY-YY
Fascia GutterY-Y-
Flat FasciaY-YY
Longline-Y--
Wide Bases Ovolo-Y--
Rebated Fascia-Y--
UrbisY-YY
Table RGA GF AV 001

Gutters and Accessories - SA / VIC / NSW

Fascia Gutter

Brackets:
GP Universal Bracket
‘J’ Strap

125 D Gutter

Brackets:
External ‘D’ Bracket
‘OB’ Strap
‘UB’ Strap

Ainsworth O.G.

Brackets:
‘OG’ External Bracket
‘OG’ Internal Strap

150mm Half Round

Brackets:
External Half Round Bracket

150 Halfline® Gutter

Brackets:
Halfline® Universal Bracket
‘UB’ Strap
Suspension Clips

115 Quad Gutter

Brackets:
Hi-Front GP Bracket
Suspension Clips
J Strap

Accessories:
Internal and External Cast Corners.

115 Hi-Ten O.G.

Brackets:
OG External Bracket
OG Internal Strap

Accessories:
Internal and External Cast Corners

Hi Front Quad Gutter

Brackets:
Hi Front Universal Bracket
J Strap

Accessories:
Internal and External Cast Corners

Urbis Gutter

Gutters and Accessories - WA

125mm Quarter Round

Brackets:
Strap (Quarter Round Quad)

Longline

Brackets:
F Strap
Standard Strap

Fascia Gutter

Brackets:
Concealed Bracket
Spring Clip
Overstrap

Ovolo Gutter

Table RGA GF GA 001

Notes:
1. Not all guttering and fascia profiles are available in all states. Please check with your local Fielders® staff for state specific availability.
2. All gutters should have a slight fall to the downpipe outlet (1 in 500).
3. Brackets/straps should be spaced at 1.2 m centres.

Sizing Eaves Gutters

The following tables are intended to assist designers in determining the size of eaves gutters required in accordance with AS/NZS 3500.3:2003.

Effective Cross Sectional Area (mm2) of Eaves Gutter - Gradients of 1:500 and Steeper

Required to Drain Roof Catchment Area into One Downpipe for Gradients of 1:500 and Steeper

Rainfall Intensity
(mm/hr)
Roof Catchment Area
10m220m2
50m2100m2
80--36007800
90--44508500
100--49009250
120-3000530010700
140-3300615012100
160-1750
700013500
180-4100780014800
200-4450850016050
225-49001030017700
2503100530011050-
3003500615012800
-
350
4000
700014500-
4004450780016100-
4504900850017600-
5005300
9400--
Table RGA GF ECSA 001

Effective Cross Sectional Area (mm2) of Eaves Gutter - Gradients Flatter than 1:500

Required to Drain Roof Catchment Area into One Downpipe for Gradients Flatter than 1:500

Rainfall Intensity
(mm/hr)
Roof Catchment Area
10m220m2
50m2100m2
80--590010450
90--650011400
100--710012300
120--8200
14250
140--930016100
160-44501045018000
180-50001145019700
200-55001245021500
225-59501360023600
250-650014800-
3004000710017100-
350
4700820019450-
4005300940021500-
45064501040023550-
500700011400--
Table RGA GF ECSA 002
Note:
Values for tables “RGA GF ECSA 001” and “RGA GF ECSA 002”were determined from Figure 3.5(B) AS /NZS 3500.3:2003

Steel Fascia System and Accessories

Fielders® ZINCALUME® and COLORBOND® Steel Fascia system offers the new home builder an easily installed maintenance free fascia at a fraction of the cost of timber.

Fielders® ZINCALUME® and COLORBOND® Steel Fascia system offers the new home builder an easily installed maintenance free fascia at a fraction of the cost of timber.

Table RGA GF FSA 001

Guttering and Fascia Accessories

Pre-made COLORBOND®, Galvanised or ZINCALUME® Mitres

Available to suit: Fascia, D, O.G., 150mm Half Round and Halfline® Gutter.

Easyfix Pre-moulded Mitres (Plain or Pre-painted)

Available to suit: O.G., 150mm Half Round and Halfline® Gutter.

Gutter Stop Ends (ZINCALUME®, Galvanised or COLORBOND® Finish)

Available to suit: Fascia, D, O.G., 150mm Half Round and Halfline® Gutter.

Downpipe Standard Sizes

Square
(1800 lengths)

Round
(1800 lengths)

50mm x 50mm
75mm x 50mm
75mm x 75mm
100mm x 50mm
100mm x 75mm
100mm x 100mm
125mm x 100mm
150mm x 100mm

50mm
65mm
75mm
90mm
100mm
125mm
150mm

Table RGA GF GFA 001

Downpipe Accessories

OUTLETS

STRAPS

ELBOWS

SHOES

Table RGA GF DA 001